Kest - KMPF Mixer Proflow

RX Code: MKN

Energy efficient stainless steel mixer with a perfect mixing result over and over again

Features

  • 80% less energy consumption on average
  • lower costs
  • less Co2 emission

Questions?

Sierk van Veen

Email: info@romynox.nl
Call: +31 (0)85 043 31 11

Questions?

Ronald van der Boon

Email: info@romynox.nl
Call: +31 (0)85 043 31 11

Questions?

Jordan Blauw

Email: info@romynox.nl
Call: +31 (0)85 043 31 11

Questions?

Wouter Eland

Email: info@romynox.nl
Call: +31 (0)85 043 31 11

Questions?

Nick van Pel

Email: info@romynox.nl
Call: +31 (0)85 043 31 11

The brand new mixer range from Kest. Over 30 years of experience in the mixer and pharmaceutical industries leads to the ProFlow.

The best mixer they ever built. The ProFlow magnetic coupling mixer is designed to ensure predictable and compliant results, minimize maintenance, minimize waste, minimize energy use and maximise the value created by a mixing process. 

Reduce energy consumption

The new highly advanced motor has an efficiency of >95%. This will save a lot of energy and thus money, while also benefitting the environment. For example, the smallest mixer in the ProFlow range uses 89-93% less energy than the smallest mixer of the Kest KM range in 24 hours of mixing. This is what we call GREEN MIXING!

  • 80% less energy consumption on average
  • lower costs
  • less Co2 emission

Ideal cleanroom mixer

The ProFlow mixer is extremely silent during operation because of the design of the drive, enhancing the environment for the operators. The drive unit does not contain any fans that will interfere with your laminar air flow. It is totally capsuled in a smooth hygienic cover that is easy to keep clean. Ideal for a clean room.

FULL PRODUCT RECOVERY AND ZERO PARTICLE SHEDDING

The unique mixing head design and the position of the blades close to the bottom of the tank allows the mixer to run while the tank is being emptied, which ables the mixer to mix low levels as well. Mixing to the last drop with uncompromised cleanability.

The robust bearing combination of Zirconium and Sic and the fine-tuned geometry, ensures no particle generation in your media. The higher bending strength of the zirconium material enables the male bearing to be made in one solid piece. This optimizes the aseptic design and increases the robustness and low wear property of the bearing.

TOTAL INTEGRITY OF THE TANK

The Mixer tank plate is machined from a solid bar. The design is FEM analyzed in comly with PED and ASME pressure vessel code. The tank plate is welded into the tank and creates a solid barrier with no risk of contamination of the media inside the tank.

REAL TIME CONTROL AND MINIMAL DOWNTIME

The ProFlow Mixer is equipped with a range of innovative electronics, monitoring capabilities and intelligent control logic. This gives you maximum process control, unparalleled energy efficiency and minimal heat transfer.

The drive unit is equipped with the patented Kest-Lock connection that ensures quick disconnection from the tank plate during maintenance. When you put the drive unit back on the tank plate, the spring closed Kest-Lock helps the operator to hold the drive unit in place when tightening the screw.

 ProFlow range

  • KMPF0/3: max capacity 30 liter
  • KMPF3/7: max capacity 70 liter
  • KMPF7/20: max capacity 200 liter
  • KMPF20/70: max capacity700 liter
  • KMPF70/120: max capacity 1.200 liter

Read more about Brand: KEST

    This product comes in a variety of options.

    Just send your request here. Our sales team will connect with you about all the product details and options available.

    Capacity 0,2 liter tot 1.200 liter
    Pressure range -1 tot 7 bar
    Temp. range 0°C tot 135°C
    Material -Mixerhead: 1.4435 (316L) & Silicone carbide (SiC)
    -Tank plate: 1.4435 (316L)
    -Bearing: Zirconium dioxide (ZrO2)
    -Seal: EPDM or Silicone
    Finishing Ra≤0.5 µm at product wetted parts
    Electrical specifications
    • 0/3, 3/7 & 7/20 version: 24 V DC
    • 20/70 & 70/120 version: 48 V DC
    Certificates FDA, USP Class VI, 3.1, IP65

      Step files for this product is not ready yet and it is upon user request for Now!

      Our team is ready to provide you with the latest STEP file for your component.
      Expect delivery to your email within 2 working days.

        Certificates for this product is not ready yet and it is upon user request for Now!

        Our team is ready to provide you with the latest Certificates for your component.

        No brochures are available at the moment.

         

          Looking For Manual ?

          Our team is here to connect with you about the most up-to-date manual for this product.
          Just let us know, and we’ll get it to you in no time!

          There is no video for this product yet, check back later.

            Curious about this Product?

            Got questions or special requests? We’re here to connect with you!
            Just fill out the form below and our friendly technical/sales team will get back to you in no time.

            Also you can call us on : + 31 85 043 3110     Or     Email : info@romynox.nl