MA 50 - PTFE backed EPDM - 2-piece SED Diaphragm
DN50 Two-piece Molded Closed
Kenmerken
- highest degree of chemical resistance
- increased stability
- longer flex life
- less porosity
- reduced cold flow
- superior performance through temperature fluctuations between hot and cold and steam sterilization cycles.
The diaphragm is the most important component of the diaphragm valve. Besides the valve body, the diaphragm is the only part which contacts the process medium. It is the dynamic part with which the flow rate of the process medium is controlled and/or stopped.
The PTFE MA 50 two-piece diaphragm consists of a seperate EPDM backing cushion and a PTFE diaphragm. It is always molded in de closed position. This gives less tension on the diaphragm when the valve is closed, and reduces the force to close the valve which increases the life of the diaphragm.
The threaded stud is connection is embedded in the PTFE of the diaphragm. To eliminate the potential of point loading at the center of the diaphragm, a floating suspension connection to the valve operating mechanism is utilized.
All diaphragms are clearly indentified and the material is batch traceable by a set of unique codes molded into the diaphragm dvary.
Read more about Brand: SED
| Sizes | DN50, IMP 2" |
| Temp. range | -20°C to 160°C |
| Connections | Threaded stud |
| Material | PTFE backed EPDM Diaphragm (2-piece) |
| Certificates | 3.1b, FDA, USP Class VI {87}, {88}, TSE/BSE |
No Datasheet PDF files uploaded for this set.
Brochures
There is no video for this product yet, check back later.
Wij gebruiken cookies voor een optimale website-ervaring