Single-Use
Kest - KM ATEX - Magnetic Coupled Mixer
For volumes to 22000 liter, ATEX Zone 1 and 21.
Kenmerken
- ATEX Zone 1 and 21
- Full traceability on all parts with media contact
- All tank plates are FEM Analyzed according to PED and ASME
- Zero particle shedding
- Short down time
Kest Mixer KM ATEX for Zone 1 and 21 is a bottom mounted magnetic coupled mixer. Aseptic design and excellent mixing performance, able to mix to the last drop.
The ideal choice for critical pharma and biotech applications where full product recovery is important. The mixer is classified for Zone 1 and 21 inside and outside of the tank.
The Kest Mixer ATEX magnetic coupled mixer has a unique mix of intelligent controls, user-friendly design and innovative engineering. Its unique design and many powerful features provide cost efficient, low maintenance mixing processes with reliable results. Everything from its mixing head design and the bearing materials is built for one thing: perfect flow.
Full product recovery and zero particle shedding
The unique mixing head design and the position of the blades close to the bottom of the tank allows the mixer to run while the tank is being emptied, which ables the mixer to mix low levels as well. Mixing to the last drop with uncompromised cleanability.
The robust bearing combination of Zirconium and Sic and the fine-tuned geometry, ensures no particle build-up in the media. The higher bending strength of the zirconium material enables the male bearing to be made in one solid piece. This optimizes the aseptic design and increases the robustness and low wear property of the bearing.
ATEX Zone 1 and 21
The mixer is ATEX classified for zone 1 and 21 inside and outside of the tank, to coop with most situations. More information about the ATEX string in the datasheet.
Total integrity of the tank
The Mixer tank plate is machined from a solid bar. The design is FEM analyzed in comly with PED and ASME pressure vessel code. The tank plate is welded into the tank and creates a solid barrier with no risk of contamination of the media inside the tank.
Minimize down time
The drive unit is equipped with the patented Kest-Lock connection that ensures quick disconnection from the tank plate during maintenance. When you put the drive unit back on the tank plate, the spring closed Kest-Lock helps the operator to hold the drive unit in place when tightening the screw.
Read more about Brand: KEST
| Mixing volume | up to 22.000 liters |
| Pressure range | -1 to 10 bar |
| Temp. range | 0°C to 150°C |
| Material | -Mixer head: 316L (1.4435) and Silicone carbide (SiC) -Bearing: Zirconium dioxide (ZrO2) -Tankplate: 316L (1.4435) -Sealing: EPDM or Silicone |
| Finishing | Ra≤[0.5 μm] [20 µin] Polished – on surfaces with product contact |
| Electrical specifications | Depends on the model type, see the datasheet |
| Marking | Head and Bearing are marked with ID No. The tank plate is marked with the material grade and heat number |
| Certificates | FDA, USP Class VI, 3.1, IP55, ATEX 2GD |
No brochures are available at the moment.
Wij gebruiken cookies voor een optimale website-ervaring